DIY Appliance Repair Tips

Wait! Before you get the itch to hire an appliance repair in Dayton for assistance, you should be able to keep your appliances in good shape with a lot of the troubleshooting tips in this post.

1. Smelly Washing Machine

A foul smell in a washer can defeat the point of owning the appliance! If you’re in the process of trying to get your clothes so they’re fresh and clean, but the appliance will not cooperate, run an empty cycle in hot water and pour in 2 cups of white vinegar and a half-cup of baking soda to get rid of the odor. This problem often happens in front-loading machines. To eliminate future smells, crack the door open after washes so it will dry out.

2. Inefficient Refrigerant

A room-temperature refrigerator in the kitchen is not a good sign. A warm refrigerator definitely will not keep beverages cold or refreshing, and the food inside of it might also be in danger of going rotten! In some cases, your refrigerator won’t require professional repair; interior might just need to be cleaned. Or the coils on the back of the refrigerator require cleaning.

Unplug the appliance and drag it away from the kitchen wall prior to vacuuming the coils. If you do not see cooling improvement, it’s a good idea to hire a professional appliance repair company in Dayton.

3. Clicking Igniter on Stove

If the igniter on your gas-powered oven continues to click and the burner does not light, look to make certain the burner cap is in place and properly aligned. You could also notice this if you’ve recently had a boil over or spill on the stove top.

Otherwise, the source is most likely to be a dirty igniter. To clean the igniter, take off the burner lid and dust away any particles. You can use a metal clothes pin to scrape debris from the grooves of the igniter. If that does not fix the issue, it’s best to not take a lighter apart without proper training; call on a professional appliance repair company to determine the problem.

4. Broken Garbage Disposal

A kitchen sink’s garbage disposal comes with self-protection in the form of an overload trip. If it is clogged, overheats, is left on for too much time, or has some other problem, your garbage disposal could just need to be reset instead of fixed. First, please make sure the power switch is turned OFF. Next, locate the button on the disposal unit under the kitchen sink and then press the button. If the switch will not stay pushed in, just wait ten minutes and attempt it again. Now, turn on the water from the faucet and turn the button on.

If the garbage disposal in the sink is filled with waste and you hear nothing but a humming sound and not the grinding of food, you might need to unwind the disposal blades using a hex key to eliminate the clog. Next, push in the reset button to get the disposal grinding again. If the tips above don’t get the appliance working like it is supposed to, do not succumb to the urge to shove your hands down in the system to solve the problem. Be safe and set up an appointment with a professional appliance repairman in Dayton.

5. No Power from Outlet

In the kitchen or bathroom, your electrical outlets must be installed with GFCI switches in order to protect from harm in wet areas. If a GFCI outlet isn’t providing power, push in the red button to see if it will restore juice.

If not, or if you’re trying a standard outlet, be certain that a breaker has not been tripped in the home’s breaker panel. If you’re uncertain if a circuit breaker has been tripped, switch it to the OFF position and back to the ON position. Please remember, safety near wiring is critical. Should you have any doubts, call a professional.

6. Wobbling Washing Machine

A shaking washing machine will create quite a obnoxious racket and is not a productive way to get wash laundry. If your washing machine starts banging, the unit may be in trouble. In order to repair this problem, turn the legs of the unit to lower or lift each corner until it’s balanced. One other possible case is the washing machine is not leveled. Crack open the top and rearrange the clothes so that they are evenly dispersed within the drum of the washer.

Trying this can help your washing machine not have to work quite as hard. If you do attempt to move around the clothing a few times without luck, do not ignore the issue. You could have a loosened motor or drum mount to deal with, which is easy for a professional technician to fix. But if you continue to use your washing machine when it has this problem could break some of the other components and result in a more costly repair later.

Call for Help

If these tips are able to solve your broken appliance, you will want to schedule an appointment from Dynamic Dayton Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts

Call Now ButtonCLICK-TO-CALL